Your car is one of your most prized possessions as it is bought after a lot of hard work and dedication. Brakes, like any other feature in your car, are the most important as they ensure the complete safety of the passengers on board. Effective braking could help save many lives as it is a standard feature every driver depends on. It needs proper maintenance to get good results while driving.
Imagine you are driving on the road like any other day and suddenly encounter a red signal. You try and apply your brakes but nothing seems to happen. You keep pressing it almost towards the floor and still, nothing happens. What would or could you do in such a scenario? It is a dangerous thought and can happen to anyone unexpectedly. Failing of brakes could be an amalgamation of multiple things like losing brake fluid or having brake pads that have worn out. All this could contribute to the brake malfunctioning. In case, you land up in such a situation, there are a few steps that you could follow to ensure safe handling of the situation.
• The situation could be managed and hence you should avoid panicking. At first, shift your car onto a lower gear. Carry out this step very smoothly to avoid complicating the situation further. This step applies to both automatic as well as manual cars. This would help slow the speed of the car down and would allow you to pull your car over towards safety.
Remember to avoid the following: a. Switching to a lower gear very quickly as your car could skid.
b. The effect of braking would be reduced if the car is put into neutral mode.
c. Do not shut the car off as that would prevent power steering your vehicle towards a safe destination. For the best brakes pad try Break pad replacement Barnet
In case the brakes are the regular ones and not the anti-lock ones, try pressing the brakes a little faster which would enable to increase the pressure of the brake fluid. Move to the next step if it doesn’t work even after pressing it for three to four times.
Application of the emergency brakes
Try applying the emergency brakes. They are installed in a car for such tough times only. However, you cannot totally rely on them to bring your car to a standstill, but it could slow your car down. You must know where the brakes are located though as some vehicles have a lever that is activated by the hand. Few others have a pedal onto the left side of the gas along with pedals for braking. It is a fair idea to give these brakes a chance while driving at lower speeds to check for its power (maybe in a parking lot that is empty or a place with no cars around).
Simply try pulling over
Switch on the hazard lights and keep moving towards the right hand of the main road trying to pull over. Be cautious while changing lanes by checking the mirrors and the traffic all around you. Signal the rest of the people to inform of you moving towards the side.
Get your vehicle towed
Even if the brakes start functioning again after failure, pull your car over and get a truck to tow it before you actually land yourself into great trouble. The car should be immediately taken to a nearby repair facility for further inspection. Driving should be stopped immediately and not be continued to assure the safety of everyone around.
It is imperative to get routine maintenance done of your brakes to avoid any unwanted situation. Take utmost care of your car; Visual inspection and regular car maintenance should always be on the top of your priority list.
No comments:
Post a Comment